6NM DC24V 0.3A Eddy Current Brake 1800 Speed With 2 Years Warranty
Flange Powder Brake
Features:
The magnetizing current has a linear relationship with torque.
The transmission torque has a linear relationship with the
magnetizing current. The size of the torque can get controlled
within larger range. Under normal circumstance, the magnetizing
current
Has a linear relationship with transitive torque within range of
5%-100% rated torque.
Stable slip torque
The slip rotational speed between driven rotor and active rotor do
not affect the transitive torque when the magnetizing current
retain unchanged, as shown in chart 4.That is to say, the static
friction torque and the dynamic friction torque have no difference.
Therefore, the torque can retain constant stably. The features are
applied to tension control, users can control the tension of the
roll material effectively as long as adjustment the magnetizing
current accurately.
Prevention heat phenomenon from slip
The friction part will generate heat inevitably or even destroyed
when it keep continuous sliding.
But this device has a complete cooling set, it will not generate a
lot of heat after long time running and it has a long service life.
| Model | Torque NM | Voltage
V | Current
A | Speed
rpm/min | Slip power
w |
|
| ZA-0.6Y | 6 | 24 | 0.3 | 1800 | 130 |
| ZA-1.2Y | 12 | 24 | 0.39 | 1800 | 320 |
| ZA-2.5Y | 25 | 24 | 0.73 | 1800 | 450 |
| ZA-5Y | 50 | 24 | 0.94 | 1800 | 700 |
| ZA-10Y | 100 | 24 | 1.21 | 1800 | 900 |
| ZA-20Y | 200 | 24 | 1.9 | 1000 | 1900 |
| ZA-40Y | 400 | 24 | 2.2 | 1000 | 2600 |
| Model | Outline dimention | Hollow shaft size | Center ring installing size |
| D | L | d(H7) | b(F8) | L1 | L2 | D1(g7) | D2 | n-dX1 dep |
| ZA-0.6Y | 128 | 68 | 12 | 4 | 4 | 2 | 70 | 80 | 3-M5*10 |
| ZA-1.2Y | 160 | 88 | 18 | 5 | 2 | 5 | 74 | 100 | 3-M6*10 |
| ZA-2.5Y | 180 | 98 | 20 | 5 | 5 | 5 | 100 | 140 | 3-M10*19 |
| ZA-5Y | 220 | 115 | 30 | 7 | 5 | 5 | 110 | 150 | 3-M10*19 |
| ZA-10Y | 275 | 136 | 35 | 10 | 6 | 5 | 110 | 150 | 6-M10*22 |
| ZA-20Y | 335 | 160 | 45 | 12 | 8 | 6 | 160 | 240 | 3-M5*30 |
| ZA-40Y | 360 | 210 | 50 | 12 | 8 | 6 | 160 | 240 | 3-M5*30 |
Application
Due to the features of the magnetic powder clutch and brake ,they
have been widely used in paper making ,printing, plastic items,
rubber industry, textile industry and dyeing, wire and cable,
metallurgy industry and tension control of winding and unwinding in
roll material processing industry.
FAQ
1. When can I get the quotation?
We usually quoted within 12 hours after receiving your inquiry. If
you are very urgent to get the price, please call us or tell us in
your email, so that we can regard your inquiry priority.
2. How should I place the order?
Please let us know the model number based on our specs for tension
controller,web guiding system. For powder clutch, powder brake,
please show us your drawing, or let us know your request torque,
and then we will provide you suitable model for confirmation.
3. What’s your MOQ basis?
Normally, we don’t have MOQ request.
4. What about the lead time for production?
Honestly, it depends on the order quantity and the type of our
products. For tension controller, load cell and edge position
controller which is about 1-3 days. For powder clutch, powder brake
which need about 3-5days.
5. What is the term of delivery?
We can arrange with EXW, FOB, CIF…etc. You can choose the most
convenient one or cost-effective way.
